LGG100-GG

50 channels of single frequency GPS and GLONASS with raw data and position solution output rate up to 100 times per second in a small attractive, sturdy, and watertight box, which contains JNS100-GG board. It is based on our JNScore chip, includes an on board power supply that accepts any unregulated voltage from 9 to 35 v.d.c., has two serial ports and typically consumes 1.6 Watts. It has advanced features like Advanced Multipath Mitigation as with other receivers from Javad. It provides 10 cm code phase precision (RMS) and accurate 1 pps.

The receiver comes with MinPad for easy operation without the need for an external controller.

Serial Connector Pinout

 

(at the receiver)

 SIGNAL NAME NUMBER DIR DESCRIPTION
Power Output

1

 O External Power Output (I<0.2A in all ports)
GND

2

I/O

 Signal Ground
CTS

3

I

 Clear to Send
RTS

4

O

 Request to Send
RXD

5

I

 Receive Data
TXD

6

O

 Transmit Data
 

7

   NC

Connector type is SEALED RECEPTACLE, 7 pin ODU G80F1C-T07QC00-0000

Power Connector Pinout

 

(at the receiver)

 SIGNAL NAME NUMBER DIR DESCRIPTION
Power Input

1

P

 +9.0V to +35.0V to PGND
Power Input

2

P

 +9.0V to +35.0V to PGND
Power GND

3

P

 Power Ground
Power GND

4

P

 Power Ground
 

5

 

  

Connector type is SEALED RECEPTACLE, 5 pin ODU G80F1C-T05QF00-0000

GPS/GLONASS External Antenna RF connector

SIGNAL NAME NUMBER DIR DESCRIPTION
ANT_IN

TNC

I

 RF input from LNA, 60 mA @ 5.0 Volts

Connector type is Applied Engineering Product (AEP) 6001-7051-003

Note: Specifications are subject to change without notice.