User visible changes in the firmware version 3.4.7 since version 3.4.6.

                             Highlights.

1. /par/rcv/igs: fixed wrong name for TRIUMPH1 and TRIUMPH4 (was
   "JAVAD TRIUMPH"). Fixed more than 20 (was 21) characters length for
   some receivers.

2. NTRIP client: the "User Agent" header was changed from "NTRIP Javad
   Client/1.0.0" to "NTRIP JAVAD GNSS Client/b1/v1", to make it
   possible to distinguish JAVAD GNSS receivers from older JPS
   receivers for the purpose of applying different GLONASS biases.

3. GSM, UHF, FH modems: fixed not initializing their parameters on
   "init,/par/" command.

4. TRIUMPH-1: fixed problem with Bluetooth module that was turned on
   after receiver reboot even when it was turned off by corresponding
   parameter.

5. TRE_G3TAJT: support for reference converter board of old
   interconnect boards implemented.

6. Bug in computation of elevation and azimuth using almanac data when
   "_LIM" option is active has been fixed.

7. TRE_G3TAJT: fixed wrong PTP time after disconnecting Ethernet cable
   and connecting it back (after resuming of PTP PHY from suspended
   state).

8. Bug has been fixed : elevation and azimuth data and GLONASS satellite numbers
   are not output for some values of parameter /par/pos/sp/meas.

9. TRIUMPH-1: support for RF board rev.10 implemented.

10. GISMORE: fixed problem getting battery charge level at receiver
    startup when GSM modem was also turned on.

11. Bug has been fixed: incorrect check of IODC in processing of QZSS
    clock data.

12. GNSS100: fix possible baud rate reset to 9600 of serial port A.

13. GALILEO: tracking of PRNs 19 and 20 is now turned on by default.


                      More Detailed Description
                (refer to GREIS for even more details)


                             1. Messages.

No changes.

                            2. Parameters.

No changes.

                             3. Options.

No changes.

                             4. Commands.

No changes.

<END>
